Welding technology of aluminum lighting truss

Welding technology of aluminum truss

The key to deformation of Aluminum Lighting Truss is welding technology
Aluminum truss is a common equipment for building stage or booth in our life.
According to the site, it can be built into various truss systems of different sizes, large, medium and small, and can be flexibly combined according to specific requirements.
The reason why it is used more and more widely is due to its many advantages.
However, any item will have a certain risk coefficient when it is used!
When the truss is used to build the stage, the requirements for the truss are relatively high. It must have sufficient hardness to ensure the safety of the stage.
If the truss quality is not good, the stage built is relatively easy to deform, and it brings great hidden danger to the safety of actors.
The lighting truss itself is a large stressed metal structure that has been cast and welded countless times before it takes shape.
Like the middle part of the bottom weld, the triangle or multi-angle truss is similar to the uneven bulge, or the bulge weld phenomenon of non-joint points.
These welds follow the residual residual stress in the welds on the very rigid truss itself, in order to achieve uniform force, which leads to the occurrence of truss deformation.
There will be welds after each welding, these welds are not simply scattered at the joints of the slats, some welds are in other places of the stage truss.www.leadertrusses.com